Atlas Fence

TL;DR Most rattles come from slack in the system: loose chain-link ties, hollow tube-to-bracket play, hinge pins without bushings, latch tongues hitting thin posts, and wind-driven panels without stops. In Austin, gust fronts and expansive clay make tiny gaps chatter like a snare drum. The fix is a three-part sequence: 1) Stabilize structure (posts, footings, […]

TL;DR Escape-artist dogs exploit the bottom line (dig-outs), the mid-span (loose boards, significant gaps), and the top edge (launch points). In Austin, clay soils, limestone shelves, and heat-warped wood make those weak spots worse. The most reliable pet-proof upgrades are: continuous dig barriers (steel mesh skirts or curb strips), bottom tension systems (tension wire or

TL;DR A leaning fence in Austin isn’t always a lost cause. Between expansive clay, gusty storm fronts, and irrigation splash, posts often fail in predictable ways you can correct without replacing the whole line. Our most durable “save the run” methods are: bell-bottom footing retrofits, sister-post reinforcements, helical tie-backs for corners and gates, concrete collars

TL;DR Most “bad” cedar gates don’t need a complete rebuild—they need proper hardware geometry, through-bolting with backing, and actual load paths between the hinge stile and the post. Austin’s clay and sun exaggerate tiny misalignments until latches miss by an inch and hinges grind. The quick wins: box or stiffen the gate frame, swap undersized

TL;DR Not every “bad section” needs a full tear-out. In Austin’s climate, a lot of fences fail in predictable, localized ways—sun-baked pickets, sprinkler rot on the bottom course, or a gate bay that went soft while the rest is sound. If your posts and rails are still doing their job, targeted panel or picket replacement